Escape™ ETM Electric Truck Mount
Mytee® is proud to introduce the Escape™ ETM, our revolutionary electric
truck mount system. From carpets and upholstery, to hard surface cleaning and flood extraction, the Escape™ ETM gives you the power of a truck mount, with the mobility of a portable extractor
.The Escape™ has broken the mold of traditional truck mounts by offering cutting-edge features that set it apart from other truck mounts.
For your convenience, the Escape™ ETM has been engineered to be powered three different ways.
- The first option is to use the included adaptors to run the ETM off a 30 amp 3-prong or 4-prong dryer outlet.
- If a 30 amp dryer outlet is not available, you can run the ETM off of four separate 15 amp outlets. You will need to purchase two Mytee Hunter Box Adaptors (Part #5007) to use this method.
- The final option for powering the ETM is to use a generator. The ETM requires almost 7,000 watts of power to run, so make sure your generator is rated to run the ETM.
- 12 gallon solution and recovery tanks
- Four 3 stage vacuums
- 325 CFM, 230″ water lift
- Adjustable 900 PSI pump
- 35 GPM pump-out
- Mobile design
- 4″ locking casters
- 10″ wheels
- Chemical injection meter
- Chemical injection valve to control injection ratio
- Wash out hose and prime valve
- Hour meter, displays time pump has been in use
- Pressure gauge displays pump PSI
- Pressure regulator to adjust pump PSI
- Cart with front 4″ locking casters and rear 10″ wheels
- 3-Prong 30 Amp Dryer Adaptor (Part #5005)
- 4-Prong 30 Amp Dryer Adaptor (Part #5006)
- Two 50′ 12/3 twist lock power cords
- Chemical metering
- 5 Quart Big Mouth™ Bottle
- 2″ x 2.5″ Cuff-Lynx™ reducer
- 2.5″ x 2.5″ swivel Cuff-Lynx™
- Pump prime / vacuum tank wash-out hose
- 25’ pump-out vacuum hose with cam lock connection